實驗室裝修的平麵設計結構

1. The laboratory layout design is a scientific and reasonable work of functional distinction and layout for the existing site of the laboratory according to the nature of the laboratory, the target orientation of the laboratory, the functional requirements of the laboratory, the type of experiment and the technological process of the experiment and other factors according to the relevant national standards.

實驗室平麵設計要求實驗室設計師必須熟悉我國建築裝飾知識、我國實驗室相關標準和規範、熟悉所設計的實驗室實驗工藝流程等

The graphic design of the laboratory requires that the laboratory designer must be familiar with the knowledge of architectural decoration in China, the relevant standards and specifications of the laboratory in China, and the designed process of the laboratory experiment, etc

2.實驗室麵積及儀器擺放,實驗室設計前應根據該實驗流程來確定儀器的種類、數量、規格型號、外形尺寸、電壓功率等參數以及擺放位置，設計師針對性的做出儀器電源、給排水、供氣、純淨水以及排風管道接口的設計。

2. Laboratory area and instrument placement. Before the design of the laboratory, the type, quantity, specification and model, boundary dimension, voltage and power and other parameters as well as placement position of the instrument shall be determined according to the experimental process. The designer shall make the design of instrument power supply, water supply and drainage, gas supply, purified water and exhaust pipe interface.

Determine the required area of each area according to the number and placement position of the instrument, and divide the effective space. The arrangement of instruments should not only be convenient for work, but also consider the bearing of the ground.

3. 通風係統設計,實驗室通風係統設計是實驗室設計中的重中之重，也是實驗室建設成敗的關鍵因素。實驗室通風係統設計包含排風係統和補風係統兩方麵。依據流體力學進行綜合的分析計算，科學合理的設計排風係統，進而達到設計上實驗室的安全、舒適、節能等目的。

3. Ventilation system design, laboratory ventilation system design is the most important in the laboratory design, and also the key factor of the success or failure of the laboratory construction. The design of ventilation system in laboratory includes exhaust system and air supplement system. According to the fluid mechanics, the comprehensive analysis and calculation are carried out, and the exhaust system is designed scientifically and reasonably, so as to achieve the purpose of safety, comfort and energy saving in the design of the laboratory.

4. 給排水設計實驗室給排水包含自來水和純水。因為實驗室的給排水好的方式都是采用暗裝，所以設計如果有遺漏的話將會給後期的實驗室管理帶來很大的不便和煩惱。

4. Water supply and drainage design laboratory includes tap water and pure water. Because the good way of water supply and drainage in the laboratory is to use concealed installation, if the design is omitted, it will bring great inconvenience and trouble to the later laboratory management.

十萬級潔淨室用於很多的工業部門，比如光學產品的製造，用於較小的元器件製造大型的電子係統，液壓或氣壓係統的製造，食品飲料的生產，醫、藥工業也常常使用。

Class 100000 clean rooms are used in many industrial sectors, such as the manufacturing of optical products, the manufacturing of large electronic systems for small components, the manufacturing of hydraulic or pneumatic systems, the production of food and beverage, and the medical and pharmaceutical industries.